Connects to the ground or return path.
When using the A68064 as a TRIAC, the following parameters are its most critical specifications for circuit design and replacement:
The A68064 is packaged in a 416-pin PGA (Pin Grid Array) package. The pinout is as follows:
For the MOSFET/Thyristor variant, the pins are generally assigned as follows: Controls switching state. Drain / Anode (D/A): High-voltage connection/load. Source / Cathode (S/K): Ground or low-side connection. Common Applications Power Management:
When integrated alongside logic circuits, the A68064 acts as a robust low-side switch or latch driver buffer. This configuration allows standard 3.3V or 5V microcontrollers to easily toggle high-current relays, solenoid valves, or multiplexed display grids without over-drawing current from the MCU control pins. A68064 Teccor - Xecor
at maximum rated voltage, ensuring that connected loads completely deactivate and do not experience partial biasing. Logic Thresholds
– Completes the circuit loop by connecting to the low side of the load or the system ground reference. ⚡ Key Features and Practical Applications
, allowing it to be easily interfaced with standard logic controllers. Core Applications The A68064 is most effective in the following scenarios: Motor & Power Control:
The A68064 is widely used in applications requiring efficient power control. Below are the core characteristics of the device based on available technical data: Teccor Component Type: High-performance N-channel MOSFET Package Type: TO-220 (excellent heat dissipation) Temperature Range: -40°C to 105°C ( TAcap T sub cap A
