: If the drive is detected, click Setup . The default password is often blank or 000000 . Set the "Flash Type" to "Auto" or manually select your NAND chip if you know it.
Use a tool like or Flash Drive Information Extractor to find the specific Controller Part-Number (e.g., AU6989SN, AU6998) and the Flash ID.
While maintaining the short, plug the flash drive into the USB port. alcor micro unknown fa00 f w 3613 updated
The drive reports a generic internal factory firmware designation, such as version 3613 or FD00 , rather than the actual operating firmware.
Alcor Micro controllers are common in many affordable or promotional USB drives. The "Unknown [FA00]" error typically triggers when: : If the drive is detected, click Setup
: In the Flash Type tab, leave the selection on Auto Detect unless your Flash ID was recognized in Step 1, in which case you can manually select the NAND memory brand (Samsung, SanDisk, Toshiba, etc.).
: The "unknown FA00" status suggests the internal firmware (f/w) is either missing or unreadable by the operating system. Use a tool like or Flash Drive Information
AlcorMP (Последняя версия ALCOR U2 MP v23.08.07.00.H)