When first connected to a discharged battery, the needle sits high. The battery is pulling maximum current to build up its base charge.
Working with car batteries carries inherent risks of electrical shock, chemical burns, and explosive gases. Always observe the following safety rules:
The (often referred to as the ML 1208E) is a 12V automatic battery charger designed for standard vehicle starter batteries, boat batteries, and other equipment like lawnmowers with a capacity of at least 5 Ah . Key Specifications Charging Voltage: 12V. Effective Charging Current: 12 A. Arithmetic Charging Current: 8 A. Input Voltage: 230V. Physical Dimensions: 170mm (L) x 110mm (W) x 320mm (H). Weight: Approximately 3.3 kg. Operating Instructions bosch kl 1208 battery charger manual
Attach the red clamp to the positive terminal of the battery.
Remove the battery from the vehicle if possible. If charging inside the vehicle, turn off all electrical components (lights, radio, ignition). When first connected to a discharged battery, the
Bosch KL 1208 Battery Charger Manual: User Guide and Troubleshooting
: For standard batteries, unscrew the screw plugs and check fluid levels; if lead plates are not covered by at least 5mm of fluid, top up with distilled water. Connection Sequence : Always observe the following safety rules: The (often
Disclaimer: This document is a reconstruction of the original manual for informational purposes. Always refer to the original Bosch documentation included with your product.