Chaser Che80 Print Driver -

: Open your driver properties, go to the Device Settings tab, and change the peripheral unit setting to "Cash Drawer Before Printing" or "Cash Drawer After Printing".

If using a network cable, enter the printer's specific .

Right-click the icon, select , and click Print Test Page . Your printer should instantly roll out a short test slip confirming successful communication. Installing the Driver on macOS and Linux

The Chaser CHE80 driver acts as the translator between your Point of Sale (POS) software and the printer hardware. Without the specific CHE80 driver, you may encounter: chaser che80 print driver

If the CHASER CHE80 remains unresponsive:

Follow these steps to connect and configure your Chaser CHE80 on Windows 10 or Windows 11. Step 1: Physical Setup Turn off the printer power switch. Connect the power cable to an electrical outlet.

The computer is looking for the printer on the wrong virtual USB port. : Open your driver properties, go to the

macOS does not always have native plug-and-play drivers for budget thermal printers. To configure it:

Chaser CHE80 is a thermal receipt printer commonly used in Point of Sale (POS) environments. The print driver acts as an interpreter, translating digital data from your computer into a format the printer can understand. Essential Setup & Installation

Last updated: March 2025. This guide is not affiliated with Chaser Technology Co., Ltd. Always refer to your device’s user manual for hardware-specific safety information. Your printer should instantly roll out a short

How is the printer ? (USB, network Ethernet, or Serial port?)

: Ensure the thermal paper is facing the correct way. Thermal paper only prints on one side! Summary Table: Quick Specs Specification Paper Width 80mm / 3 inch Command Set USB / Ethernet / Serial OS Support Windows 7, 10, 11, Linux Need more help? Check your device for a small sticker with a Model Number