Are you dealing with a or issue during the installation?
Assemble the X-ray tube head. According to technical manuals , carefully mount the tube inside the housing, ensuring the thermal switch is connected.
From the installed manual’s “Detector Service” section:
Link the display console and the PC interface module to the main generator cabinet. drgem x ray service manual install
Bolt the collimator to the tube head, ensuring the light field aligns with the expected radiation field. Electrical Wiring and Connectivity
: Room shielding specifications and power supply requirements (typically 3-phase 380V or 400V). Mechanical Assembly
: Enter the service mode menu on the console and select the matching X-ray tube model number from the pre-programmed library. Are you dealing with a or issue during the installation
The installation process involves both physical setup and critical software configuration.
Ensure the emergency switch is wired before assembling the tube covers. 3. Software Configuration and Calibration
Verify that all cooling fans in the generator cabinet and X-ray tube housing are operating correctly. Tube Parameter and Stator Calibration Mechanical Assembly : Enter the service mode menu
Calibration ensures that the radiation output matches the selected technique factors on the console. Generator Programming
Link the generator, workstation, and digital detector using the provided interface cables (usually Ethernet or specialized RS-232). Software Configuration and Calibration
Do you need troubleshooting steps for or digital flat panel integration ? Share public link
Route the incoming 3-phase lines to the main terminal block inside the generator.