Led Mirror Clock Instructions — Dt-6507

Before you start using your DT-6507 LED mirror clock, make sure to unbox and inspect it carefully. The clock comes with the following components:

Setting date and other options (if supported)

The DT-6507 LED mirror clock is a stylish and functional timepiece that provides a convenient spot to check your reflection and keep track of time. By following the instructions outlined in this article, you can ensure your clock lasts for a long time and provides accurate timekeeping. If you have any questions or concerns, feel free to contact the manufacturer or supplier for assistance. dt-6507 led mirror clock instructions

Press and hold the button for 3 seconds until the year digits begin to flash.

An (usually a bell or a dot next to the word "ALARM") will appear on the display, meaning it is active. Before you start using your DT-6507 LED mirror

Use the or DOWN buttons to toggle between 12Hr and 24Hr formats. Press MODE to confirm.

: Install three fresh AAA batteries in the rear compartment to retain memory settings when disconnected from power. If you have any questions or concerns, feel

By default, the clock may cycle through Time, Date, and Temperature continuously. If you want it to show only the time: Press to return to the time display. Press and hold the DOWN button. If the screen says dP-1 or All , it will loop all data.

Product overview The DT-6507 is an LED mirror clock that combines a reflective surface with a bright digital time display. It shows hours and minutes; some models also display seconds, AM/PM, date, and temperature. Power is supplied via the included USB cable; an internal battery (if present) preserves settings during brief power interruptions but does not run the display continuously.