FirstChip MpTools (Mass Production Tools) is a proprietary, low-level factory software application designed to initialize, benchmark, and flash firmware onto USB flash memory controllers manufactured by FirstChip Technology Limited. Version represents a highly stable, widely compatible release capable of handling diverse NAND flash configurations.

: Switch the language to English in the right-hand column for easier navigation. Recovery :

The low-level formatting process will , including its partition tables, any files, and the firmware itself before rewriting it. There is no way to recover data from the drive after this process starts. Ensure you have backed up any important files, as they will be lost.

You may need to put the flash drive into Test Mode (TestMode/MaskRom) by shorting the pins on the USB circuit board. Download "FirstChip FC1178 FC1179 mptools v1052 free"

Plug in your corrupted USB drive. The software should automatically detect it in one of the slots, indicated by a green or white box. Configure Settings (If Necessary): Click the Setting button.

Overwrites corrupted controller microcode causing "device not recognized" errors.

The entire process may take anywhere from , depending on the capacity of the drive, the speed of your USB port, and whether you selected a low‑level format. Do not disconnect the drive or close the tool during this process.

Always insert the flash drive into a native USB 2.0 port (typically black, not blue) directly on the computer's motherboard to avoid data loss from controller timing issues.

Before downloading and running FirstChip MPTools V1052, you must verify that your USB drive actually contains a FirstChip FC1178 or FC1179 controller. Using MPTools designed for a different manufacturer (like Alcor, Silicon Motion, or Phison) can permanently brick your device.

The process can take anywhere from 2 minutes to over an hour depending on the physical size and speed of the NAND chip. Phase 5: Verification

A fake 2TB drive that is actually 32GB can be re-partitioned to its real capacity, allowing it to function properly.

: Using MPTools will permanently erase all data on the USB drive.

: Insert your drive, click Refresh (or "Enumerate") to see the device, and then Start to begin the repair process.

Locate the toggle box along the edge of the interface and click English . The UI text will instantly refresh. 2. Access the Parameters