Gordak 952 User Manual Updated Verified

Normal operation. Wait for blinking to stabilize before applying tool to components.

: Before first use, you must release the pump securing screws located at the bottom of the machine. Failure to do so can cause serious mechanical damage.

Blinks when the iron reaches and maintains the set temperature. 🛠️ Operating Instructions Using the Hot Air Gun

Adjusts the fan/pump speed to regulate airflow volume. gordak 952 user manual updated

| Task | Soldering Iron Temp | Hot Air Temp | Airflow | |------|--------------------|--------------|---------| | Through-hole desoldering | 350°C | 380°C | 60% | | SMD IC removal | N/A | 350–380°C | 50–70% | | Soldering small SMD parts | 320°C | 330°C | 40% | | Heat shrink tubing | N/A | 250°C | 30% |

Power off immediately. Remove the retention screws from the bottom of the case. Heating element failure or sensor open-circuit.

: The hot air gun and soldering iron have separate power switches and can be used simultaneously or independently. Normal operation

Understanding the limitations and power ratings of your equipment ensures safe operation and prevents damage to sensitive components.

220V AC (or 110V AC depending on regional model) Total Power Consumption: 270W

Please clarify which of the following options you need so I can provide the correct details: Digital Manuals: Failure to do so can cause serious mechanical damage

The top screen displays the real-time temperature of the hot air stream, while the bottom screen displays the soldering iron temperature.

Dedicated toggle switches enable you to run the hot air pump, hot air heater, and soldering iron together or separately. Operating Instructions Using the Hot Air Rework Tool