Observe the main control board LEDs. The status light should change from blinking red to steady green, indicating a successful boot sequence. Sensor Calibration
The gates will perform a self-test routine. The wings will open slowly, find their mechanical limit stops, and close to establish the baseline home position. Sensor Calibration
| Specification | Details (Standard Models) | | :--- | :--- | | | BA (silver anodized) ; EV (black lids, blue/white LED) | | Passage Width | Standard 600mm; optional Wide 900mm | | Housing Material | 304 grade stainless steel, glass inlay | | Barrier Type | Motorized swing glass flap leaves | | MCBF (Durability) | 30 million cycles | | Passage Rate | Up to 40 people/minute (continuous) | | Detection System | Up to 36+ IR sensor pairs; advanced anti-tailgating algorithms | | Indoor/Outdoor | Indoor (standard); Outdoor variants need no overhead roof | | Failsafe Feature | Fail-safe: Wings open automatically on power failure | gunnebo speedstile fl installation manual
Mark the locations for the anchoring holes through the base frame.
The SpeedStile FL is strictly designed for indoor use. Observe the main control board LEDs
Solution: Clean the optical lenses thoroughly. Check for misaligned cabinet walls.
The Gunnebo SpeedStile FL is a premium speed gate designed to provide secure, high-throughput pedestrian access control while maintaining an elegant architectural aesthetic. Proper installation is critical to ensure operational reliability, structural integrity, and user safety. The wings will open slowly, find their mechanical
Gunnebo SpeedStile FL is a high-performance speed gate designed for rapid pedestrian throughput with medium security. Installation requires precise site preparation and alignment to ensure the safety sensors and motorized wings function correctly. Critical Installation Requirements Foundation: The floor must be finished, flat, and level to within plus or minus across the entire footprint. Concrete Specification: Use concrete with a minimum resistance of fck (cube) 30N/mm² Dimensions: A minimum foundation depth of is required, with a bolting depth of at least Cable conduits must rise at least
In the world of high-security entrance automation, the stands as a benchmark for speed, aesthetics, and robustness. Whether deployed in corporate headquarters, stadiums, or government buildings, this waist-high optical turnstile is designed to manage pedestrian traffic flow while preventing tailgating.
