Cause: The furnace is failing to reach or hold the required vacuum level.
As of this writing, the official Ivoclar Programat P100 English manual can be obtained directly from Ivoclar’s website (Support → Downloads) or via authorized dental dealers.
The Programat P100 is a compact dental laboratory furnace produced by Ivoclar for firing, sintering, and glazing ceramic restorations. It’s aimed at small labs and practices that require reliable, space-efficient equipment for processing denture teeth, veneers, crowns, and small ceramic frameworks. ivoclar programat p100 manual english
Before operating the P100, reviewing safety precautions in the manual is mandatory:
Arrow keys used to input specific parameters like temperature rise rate, hold time, and vacuum levels. Cause: The furnace is failing to reach or
: Never operate the furnace without the firing table correctly positioned. Stomdevice 3. Basic Operation & Programming
Controlled cooling phases to prevent ceramic cracking or checking. Initial Setup and Installation It’s aimed at small labs and practices that
Measure the resistance of the muffle. If open circuit, replace the QTK muffle. Damaged Pt-Rh platinum thermocouple.