For digital models, press the button (sometimes labeled ZONE or SET ) to cycle through the standard time zones: P / PT – Pacific Time M / MT – Mountain Time C / CT – Central Time E / ET – Eastern Time
It can take between 3 to 15 minutes for the clock to catch the signal and set itself to the correct time. If it fails initially, it will try again every hour or overnight when interference is lower. 2. Selecting Time Zones
If your clock still refuses to sync after 24 hours, you may have a defective unit. Contact Kincaid customer support (usually printed inside the battery cover) for a warranty replacement. kincaid radio controlled clock instruction manual
Press the button incrementally for precise, minute-by-minute adjustments.
: It can take anywhere from 3 to 15 minutes to catch the initial signal, but it is often more successful overnight when atmospheric interference is lower. Manual Time Setting For digital models, press the button (sometimes labeled
Once the signal is successfully captured, the hands will fast-forward to the correct local time, or the digital display will stabilize. Section 3: Manual Settings and Adjustments
If you change it later, press and hold the SYNC button for 5 seconds to reset the clock. Selecting Time Zones If your clock still refuses
button for 3 seconds. The hands will move to 12:00 and start searching. Hard Reset:
If your Kincaid clock does not automatically catch the signal within 24 hours, or if you live in an area with weak reception, you may need to program your time zone and adjust settings manually. Button Layout Overview
The clock is exactly 1 hour off. Solution: You likely live in Arizona or Indiana (non-DST zones), or you forgot to flip the DST switch to "ON" or "OFF." Find the tiny switch labeled DST and flip it. The clock will fix itself within 1 hour.