Software [verified] - Motorola Gm360 Programming

In the left-hand navigation tree, expand the folder. Click on Conventional Information . Go to Personality to add or edit channels. For each channel, configure: Rx Frequency : The receiving frequency. Tx Frequency : The transmitting frequency.

If you want to dive deeper into custom configurations, let me know:

Modern convenience: USB cables with an integrated FTDI chip (e.g., Kawa, BlueMax49ers, or ReadyRadios). These emulate a COM port and eliminate the need for a RIB box. – cheap $10 eBay cables often use counterfeit FTDI chips that cause driver issues. Spend $30–50 on a reputable brand. motorola gm360 programming software

Modify the frequencies and settings in the "Conventional Personality" and "Channel" folders.

Modern "RIB-less" USB cables (like the RKN4081) have the interface electronics built into the USB plug and connect directly to the radio's front microphone port (RJ45). Operating System: In the left-hand navigation tree, expand the folder

The most widely recognized and compatible version of CPS for the GM360 is (also referenced as part number ENVN4005Y ). This is the Professional GP300/GM300 Series CPS , which was typically distributed by Motorola on a CD-ROM. The software is designed for "knowledgeable technical personnel," meaning it is a professional tool with a steep learning curve. The software version R03.06.00 or higher is recommended for full compatibility with the GM360 and its varied firmware revisions.

: A dedicated cable, such as the Motorola GM360 Programming Cable , is required to connect the radio to your PC. For each channel, configure: Rx Frequency : The

: Set up advanced signaling like Private Line (CTCSS/DCS) and 5-Tone Selective Signaling .

Open the software, go to the File or Setup menu, and select the correct COM port to match your cable. 3. Key Programming Tasks