Nokia 7250 Ixr X1 Installation Guide Jun 2026

Connect a standard Category 5e/6 patch cable to the MGMT ETHERNET port for out-of-band IP management. Transceiver and Fiber Installation

Torque-limiting screwdriver (capable of measuring in inch-pounds or Newton-meters). ESD (Electrostatic Discharge) wrist strap. 19-inch equipment rack (EIA-310 standard).

Secure the power cord using the retaining clip to prevent accidental detachment. nokia 7250 ixr x1 installation guide

Hold the router and its components by the carrier edges. Avoid touching the electronic components or connector pins. Environmental Requirements

If the router was shipped with empty slots: Connect a standard Category 5e/6 patch cable to

Slide the module forward until the indicators sit flush with the chassis faceplate.

Insert your SFP, SFP28, or QSFP28 transceivers into the high-speed line card ports. Remove the protective dust caps only immediately prior to connecting clean fiber optic cables. Initial System Boot and Verification 19-inch equipment rack (EIA-310 standard)

The 7250 IXR X1 front panel typically offers:

When the boot sequence completes, you will be prompted with a login screen. The default credentials for Nokia Service Router Operating System (SR OS) initialization are typically: admin Password: admin