If it fails, the box will turn with an error code (e.g., 0x1102 ).
In the slot, browse and select your corresponding burner binary (e.g., BN07V502TAW.BIN ).
When to contact vendor support
MPALL v5.13.0C is a high-level "Mass Production" (MP) tool designed to repair, format, or reflash firmware on USB flash drives using Phison controllers. This specific version is often used for newer controller models like the PS2251-07 (UP307) Essential Preparation
If your exact NAND chip is listed in the database, select it. If not, leave it blank for automatic detection. Phison Mpall V5.13.0c
Updating to Phison MPall V5.13.0c firmware is a straightforward process that requires some technical expertise. Here's a step-by-step guide:
: Allows for advanced partitioning, such as creating a fixed disk partition, a CD-ROM emulation partition, or encrypted areas. Write Protection Removal If it fails, the box will turn with an error code (e
Click the button on the right side of the interface. The tool will scan your USB ports and display your drive in one of the numbered grid boxes.
Select 2.0 or 3.0 based on the USB port you are plugging into. Step 3: Configure the Application Settings Navigate through the tabs in the parameter tool: This specific version is often used for newer
Using mass production tools carries inherent risks. Keep these safety parameters in mind: