When finished, the cuff deflates fully. Your Systolic pressure, Diastolic pressure, and Pulse rate will display simultaneously.
Insert four AAA batteries (usually required) according to the polarity markings (+ and -). Close the cover securely.
Once completed, your systolic, diastolic, and pulse results will display simultaneously. rak283 blood pressure monitor user manual
To help narrow down any remaining questions, let me know if you need specific help with , matching the cuff size to your arm , or tracking irregular heartbeats .
Set up your device correctly before taking your first reading to ensure accurate data tracking. Battery Installation When finished, the cuff deflates fully
To ensure continuous clinical accuracy, it is recommended to have the monitor inspected and calibrated by an authorized service center every two years.
Check that the air tube plug is firmly connected to the monitor side-port. Blood pressure reading falls outside measurable limits. Relax for 10 minutes, re-apply the cuff, and re-test. Lo Battery power is depleted. Replace all 4 AAA batteries or plug in the USB cable. Care, Maintenance, and Calibration Close the cover securely
Press the MEM button while the device is off. It will first show the average of the last three readings.
With the device off, press and hold the button for 3-5 seconds.
Press the button to make sure you are viewing the correct user profile (User 1 or User 2). Press the MEM button.