Use appropriate sterilization times and temperatures (e.g.,
Once the target temperature is reached, the sterilization timer will begin counting down. Step 6: Cycle Completion and Unloading
Operating the Sanyo MAC-1200 requires a clear understanding of its front control panel, which combines physical knobs, digital displays, and status indicator lights. sanyo mac 1200 autoclave manual
The Sanyo MAC 1200/MLS series autoclaves are designed for longevity and reliability. By following the guidelines in the regarding proper loading, regular cleaning with distilled water, and prompt troubleshooting of the door gasket, you can maximize the lifespan of your equipment.
Before starting a cycle, ensure the unit is placed on a level, heat-resistant surface with adequate ventilation. 1. Water Filling Open the lid and remove the sterilization baskets. Pour distilled or deionized water into the chamber. Use appropriate sterilization times and temperatures (e
| Cycle | Temperature (°C) | Exposure Time (min) | Drying Time (min) | | --- | --- | --- | --- | | 121°C Standard | 121 | 15 | 0 | | 134°C Standard | 134 | 10 | 0 |
Fixed options or adjustable dial typically ranging from 115°C to 121°C. By following the guidelines in the regarding proper
. Ensure it is clean and free of cracks; a compromised seal is the primary cause of pressure loss and cycle failure. Sterilization Integrity : Incomplete cycles are often due to clogged filters
Do not attempt to force the lid open. Wait until the digital display shows a temperature below 80°C and the pressure gauge reads exactly 0 MPa.
Correction: Wipe the gasket clean with a damp cloth. If physical cracks or flattening are visible, replace the gasket entirely.