Simco Fmx002 Manual [new] Full «Exclusive»

A: No, the Simco FMX-002 is not Intrinsically Safe (IS) and should not be used in hazardous or explosive atmospheres.

Conductive resin with a stainless steel grounding snap for safety Safety & Maintenance Grounding:

The device will automatically shut down after approximately 5 minutes of inactivity to preserve battery life. simco fmx002 manual full

For voltages below 1.49 kV, the display shows the exact value (e.g., 0.55 kV).

Note: Zeroing won't work if the reading is already high (>50V) or if "HOLD" is active . 2. Taking a Measurement A: No, the Simco FMX-002 is not Intrinsically

Okay, structure outline:

Shows charge polarity (+ or -), numerical value, range mode, and battery status. Power Button (Red): Cycles the unit on and off. Note: Zeroing won't work if the reading is

Connect the supplied grounding lead to the conductive case of the meter to ensure accurate readings.

Hold the unit firmly in your bare hand. The conductive case grounds the internal circuitry through your body to the floor.

To maintain the ±10% accuracy tolerance required by international ESD standards, the FMX-002 must be calibrated once a year. Calibration requires a specialized static test fixture and a precision high-voltage power supply.