Xtra Safe Kt 82001 Manual < VALIDATED › >

The safe will beep, and the light will turn off to confirm your new code is saved. Testing Your New Code

: Rotate the external dials to your desired 4-digit combination.

Before operating your safe, ensure you have all the necessary components typically included by the manufacturer. What is in the Box Override Keys (2x): Used for emergency access. Xtra Safe Kt 82001 Manual

: Use a drill with a bit size appropriate for the included wall anchors (usually 6mm or 1/4 inch).

Use a pencil to mark the position of the four screw holes onto the wall through the back of the box. The safe will beep, and the light will

: You can force a complete factory reset. Open the battery compartment, pull the batteries completely out, and wait 5 to 10 minutes. This clears the internal memory storage. Reinsert the batteries, and the safe will default back to its original passcode ( 0000 ).

: Inside the door, look for a small metal lever. It is usually marked with Enter Program Mode : Push the lever from position to position (sometimes requires pushing it sideways then up). Set New Code What is in the Box Override Keys (2x):

Enter the 4-digit code ( 0000 ). The green light will turn on. Turn the knob clockwise, and pull the door open.

When you first unbox your safe, the batteries are not installed, and the electronic keypad will not function. You must use the manual override system to open the safe for the first time. Step-by-Step First Open