Ys9082hp Mptool Updated Site

The drive should now appear as a generic "YEESTOR USB Device" in Device Manager.

: MPTool versions are highly specific to the exact brand and generation of flash memory chips soldered onto your SSD board (e.g., Intel 144L QLC, Hynix, Ymicron, or Qimonda). Flashing a software bundle meant for Intel NAND onto a drive carrying Hynix NAND will result in a bricked device or an immediate "Flash ID Mismatch" error.

The drive will now register in Windows Device Manager as a generic ROM storage device without locking up your operating system. Configuring and Running the YS9082HP MPTool ys9082hp mptool

Take a pair of metal tweezers to together.

Safely open the plastic or aluminum casing of your SSD to expose the printed circuit board (PCB). The drive should now appear as a generic

: 4 Channels with up to 4 Chip Enables per channel (4CH, 4CE/CH). NAND Support : 2D/3D TLC and QLC flash memory.

Are you currently troubleshooting a or looking for a matching firmware version for your SSD? Yeestor YS9082HP SSD Firmware Repair Guide | PDF - Scribd The drive will now register in Windows Device

Before using the MPTool, understanding the hardware constraints ensures you do not inadvertently brick the controller. Developed by Yeestor , the YS9082HP is a highly pervasive, budget-friendly SATA 3.2 solid-state drive controller:

Up to 550 MB/s Sequential Reads and 510 MB/s Sequential Writes.