This is a comprehensive guide to understanding, downloading, and installing firmware for the (covering both the original X-Plus and the X-Plus 2).
QIDI X-Plus Firmware Update: A No-Nonsense Guide (And Why You Should Do It)
: Use a thumb drive formatted to FAT32 .
Turn off the printer. Delete the files from your USB, re-download the firmware package, and extract them again. Rename the update file if instructed by QIDI support documentation, re-insert the drive, and reboot. If the screen remains unresponsive, contact QIDI support to obtain the boot recovery tool. UI Language Resets to Chinese qidi xplus firmware install
Warning: flashing firmware can void warranty or brick the printer. Proceed at your own risk.
A USB drive (ideally 8GB or smaller) formatted to FAT32 .
The USB drive must be formatted to FAT32 with an MBR (Master Boot Record) partition table. This is a comprehensive guide to understanding, downloading,
Older models often require "printing" the firmware files like G-code.
Do not place the files inside a folder, or the printer will not detect them. 3. Installing the Firmware Turn off your QIDI X-Plus.
The system will automatically detect the update files on bootup, flash the host/MCU, and reboot into the new Klipper screen interface. Delete the files from your USB, re-download the
Installing firmware on a QIDI X-Plus varies slightly depending on whether you have the original X-Plus, the X-Plus 3, or the newer X-Plus 4. Most updates are performed using a USB drive formatted to FAT32. Preparation: Hardware & Files
If using an X-Plus 3, rerun PID calibration for both the nozzle and heated bed via the Fluidd/Mainsail web interface to ensure stable thermal management. Troubleshooting Common Installation Failures Printer Ignores the USB Drive
Copy the extracted files directly onto the of your FAT32-formatted USB drive.
The printer will automatically detect the firmware file and start flashing.
Filter
